|
|
|
Industrial Applications of ESS technology |
 Induction charging nozzles are suitale for many industrial coating applications. These nozzles are an alternative to many types of corona, contact and high-voltage induction nozzles.
The ESS Max-Charge has these unique benefits:
- Suitable for liquid based formulations with a wide range of resistivities.
- produces no air ions to cause charge buildup on the workpiece.
- Suitable for coating plastics or metals.
- Low-voltage and low power. Can even be operated from a 9 volt battery.
- Charging levels are above -6 mC/liter.
- Suitable for operation in harsh environments.
|
Max-Charge nozzle specifications:
- Air-atomizing induction charging nozzle for aqueous basedsprays or other medium to high conductivity spray mixes.
- Fluid resistivity range: 20 ohm-cm to 50,000 ohm-cm * 0.6 kV to 1.2 kV normal operating voltage range
- 0.10 - .80 mA operating current
- Air pressure range: 25 to 80 psi
- Air consumption: 2.9 to 10 cfm
- Liquid flowate: 50 to 200 ml/min
|
|
Home | Products | Technology | Testimonials | Photos, etc.
About ESS | Contact Us | En Español
Copyright © 2008, Electrostatic Spraying Systems, Inc. — All Rights Reserved
